ESU DECODER LOKPILOT 5 DCC, NEXT 18, RETAIL

The LokPilot 5 DCC is a "purebred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be activated. Thanks to RailComPlus®, the decoders are automatically registered with a suitable DCC system such as the ESU CabControl.

The decoder supports all DCC programming modes and thanks to RailCom®, the CV values ​​can be read on the main track with RailCom-equipped DCC systems. For command stations that only program CVs 1 to 255, auxiliary CV registers are available.

The LokPilot 5 DCC decoder recognises Märklin® braking

The LokPilot 5 DCC is a "purebred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be activated. Thanks to RailComPlus®, the decoders are automatically registered with a suitable DCC system such as the ESU CabControl.

The decoder supports all DCC programming modes and thanks to RailCom®, the CV values ​​can be read on the main track with RailCom-equipped DCC systems. For control stations that only program the CVs, there are 1 to 255 auxiliary CV registers.

The DCC decoder LokPilot 5 recognises Märklin® braking sections as well as ZIMO® HLU/ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or DC voltage is also possible. Stopping is also possible with a Selectrix® brake diode. An automatic ABC shuttle train enables automatic travel between two train stations.

The DCC decoder LokPilot 5 can be used on analogue DC trains. The maximum speed can be set separately.

The decoder switches between the operating modes fully automatically "on the fly".